Skip to main content

Campare centrifugal pump and reciprocating pump


Campare centrifugal pump and reciprocating pump

SN.
Centrifugal pump
Reciprocating pump
1.
Its speed is high.
Its speed is low.
2.
It gives even flow of liquid.
It gives fluctuating  flow of liquid.
3.
It has lower efficiency,at high heads and greater efficiency at low head.
It has lower efficiency,at smaller  heads and high efficiency at higher head.
4.
It is suitable for low head and large discharge.
It is suitable for higher heads and smaller discharge.
5.
It can pump dirty water also.
It can pump clear water only.
6.
It is compact and occupies less space.
It requires more space.
7.
It’s initial cost is less.
It’s initial cost is high.
8.
It needs priming.
It does not need priming.
9.
Air vessels are not required.
Air vessels are required.
10.
Operation is quite simple.
Much care is required in operation.
11.
It’s maintenance cost is less.
It’s maintenance cost is more, due to wear and tear.





Comments

Popular posts from this blog

Determine the height of a rectangular weir of length 6m to be built across a rectangular channel. Maximum depth of water on the upstream side of the weir is 1.8 and discharge is 2000 l/sec . Take Cd = 0.6 and neglect end contractions.

Determine the height of a rectangular weir of length 6m to be built across a rectangular channel.  Maximum depth of water on the upstream side of the weir is 1.8 and discharge is 2000 l/sec . Take Cd = 0.6 and neglect end contractions.

problem:- A circular tank of diameter 4m contains water up to a height to 5m. Orifice of diameter 0.5m at the bottom. Find the time taken by water:- 1. To fall from 5m to 2m 2. For completely emptying to tank take cd=0.6

  A circular tank of diameter 4m contains water up to a height to 5m. Orifice of diameter 0.5m at the bottom. Find the time taken by water:- 1.           To fall from 5m to 2m 2.           For completely emptying to tank take cd=0.6

What is centrifugal pump and reciprocating pump.

What is centrifugal pump   and reciprocating pump.  Centrifugal pump:- if the mechanical energy is converted in to pressure energy by means of centrifugal force acting on the fluid, The hydraulic machine is called centrifugal pump. Main parts of centrifugal pump:- 1.   Impeller 2.   Casing 3.   Suction pipe with a foot valve and a strainer 4.   Delivery pipe 5.   Delivery valve 6.   Eye of pump 7.   Sump Reciprocating pump:- if the mechanical energy is converted in to hydraulic energy by sucking the liquid in to a cylinder. The pump is known as reciprocating pump. Main parts of reciprocating pump:- 1.   Delivery pipe 2.   Delivery valve 3.   Cylinder 4.   Piston 5.   Connecting rod 6.   Crank 7.   Suction valve 8.   Suction pipe 9.   Piston rod 10.Sump level