Skip to main content

Explain factor affecting soil compaction:-


· Explain factor affecting soil compaction:-

The following  factors of soil compaction are as follow:-

1.   Moisture content:-

It has been seen by the laboratory experiment that as the water content is increased, compacted density goes on increasing till a maximum dry density is achieve which further addition of water, decreases the dendity.

2.   Type of compaction:-

The type of compaction is also affected the dry density because any soil shows good result with the particular type of compaction i.e. at the same moisture content soil has maximum dry density with a particular type of compaction.

3.   Amount of compaction:-

The effect of increasing the compactive energy, result in an increasing in the maximum dry density and decreasing in the optimum moisture content.

4.   Type of soil:-

The maximum dry density achieved corresponding to a given compactive energy largely depend upon the type of soil.

5.   Addition of admixture:-

A number of admixtures may be incorporated in the soil to modify its compaction properties. The most commonly used admixtures are – cement, lime and bitumen.

Comments

Popular posts from this blog

problem:- A circular tank of diameter 4m contains water up to a height to 5m. Orifice of diameter 0.5m at the bottom. Find the time taken by water:- 1. To fall from 5m to 2m 2. For completely emptying to tank take cd=0.6

  A circular tank of diameter 4m contains water up to a height to 5m. Orifice of diameter 0.5m at the bottom. Find the time taken by water:- 1.           To fall from 5m to 2m 2.           For completely emptying to tank take cd=0.6

what is venturi flume - Campare venture meter and orifice meter.

Campare venture meter and orifice meter. Venture meter:- A venturi meter is a tool used to measure the flow rate of a pipe fluid. It cosist of three parts- (1). A short converging part (2). Throat (3). Diverging part It is based on the principle of bernaulli’s equation. Orifice meter:- It is an instrument used to measure the fluid flow rate through a pipe. It's cheaper than a venture meter device. It also operates in the same way as the venture meter principle. Venture flume A venture flume is a critical flow, open flume with a restricted flow, resulting in a fall in the line of hydraulic grade, producing a critical depth. It is used in very high flow rates flow measurements, generally provided in millions of cubic units.

Determine the height of a rectangular weir of length 6m to be built across a rectangular channel. Maximum depth of water on the upstream side of the weir is 1.8 and discharge is 2000 l/sec . Take Cd = 0.6 and neglect end contractions.

Determine the height of a rectangular weir of length 6m to be built across a rectangular channel.  Maximum depth of water on the upstream side of the weir is 1.8 and discharge is 2000 l/sec . Take Cd = 0.6 and neglect end contractions.